|
|
Battery monitoring and protection system
Hladík, Jan ; Červinka, Dalibor (referee) ; Knobloch, Jan (advisor)
This work deals with design of battery management system. Requirements for battery management system and its conception is discussed in the first part of the work. System is able to disconnect load or charger from battery using MOS-FET transistors. It measures battery cell's voltages and is capable of passive balancing. Microcontroller is used for data processing and system control. Schematics, printed circuit board layout and control algorithm was designed. Prototype of the battery management system was then manufactured and tested.
|
|
|
Small solar power plant
Šimůnek, Patrik ; Kolouch, Jaromír (referee) ; Kubíček, Michal (advisor)
This bachelor thesis deals with the design of a small solar power-station utilizing a lead-acid battery. Its purpose is to provide power for small household applicances. This project consists of a theoretical design of the system, detailed design of MPPT regulator and a design of schematic circuitry and PCB. Finally, actual measured parameters of the whole systém are presented.
|
|
|
Using of X-ray for distribution analysis of electrodes for secondary cell application
Macháč, Milan ; Bača, Petr (referee) ; Chladil, Ladislav (advisor)
This diploma thesis is focused on in-situ analysis of the composition of the negative electrodes of second secondary cells with using X-ray radiation. The first part is dedicated to the theory of lead accumulators, including charging, discharging, battery components and individual degradation mechanisms. The main part of the thesis includes the preparation of electrochemical in situ XRD cells and following measurement of the growth of lead sulphate crystals on the OCV potential. Furthermore, the lead cell was subjected to the measurement of the cyclic voltammetry around the working point of the negative electrodes. From these measurements was evident gradual increase of the lead sulfate crystals. The analysis was supplemented with electron microscopy images. In addition, were evaluated the in-situ particle analysis of the LTO Sigma sample.
|
|
|
Carbon materials for power sources
Tichý, Jiří ; Bača, Petr (referee) ; Novák, Vítězslav (advisor)
This work deals with carbon materials and using them in electrochemical energy sources. Object of this work was to prepare carbon materials and investigate their electrical properties. The theoretical part objects of the carbon materials, their properties, application in electrochemical energy sources and measurement methods used in experimental part. Experimental part describes the preparation of the electrodes with various carbon materials and summarizes the results of measurements.
|
|
|
Usage of transmission at electric vehicles
Běloušek, Ondřej ; Prokop, Aleš (referee) ; Řehák, Kamil (advisor)
At first bachelor thesis divides different conceptions of electric vehicles with the aim to describe characteristic components which electric vehicles contain, and that make it different in comparison with conventional cars. From the principle of the electric vehicle it is obvious that electric energy which is necessary for electric drive must be stored and for this reason the batteries and important components are described. The next part is dedicated to the powertrain which is affected by the presence or absence of an internal combustion engine and its usage rate. Common feature is an electric machine which transforms electrical energy into mechanical energy, and which makes powertrain complete. Gearboxes used at electric vehicles are the next part which is affected by the type of power unit that they cooperate with. For that reason, one representative from each part is described. The representative of hybrid electric vehicles is planetary gear set of Toyota Prius 2010, representative of battery electric vehicles is one-speed transmission of Tesla cars and in the end the multi-speed transmission is mentioned because it is today´s trend. Because of the absence of an internal combustion engine for some types of electric vehicles, the noise and vibrations from gearbox come to the fore. The main source of the vibration is gears teeth contact and rattle of the other components. The last part of the thesis is focused on the design of a technical experiment that is suitable for measuring vibration and noise from two-speed automatic transmission. Firstly, the theoretical basis of measurement is described. The design itself takes into account the suitable measuring equipment, the right choice of components that realize closed loop and installation space of the acoustic chamber.
|
|
|
Battery charger
Paták, Michal ; Kopečný, Lukáš (referee) ; Burian, František (advisor)
This diploma thesis deals with battery charging. The thesis describes qualities and possi-bilities of lithium battery charging. The charger is independent on the input voltage and recharges batteries carefully. Due to a careful recharging process it is needed to measure the voltage at various cells of the battery and then balance this voltage. Since the charger is to be implemented in a robot, it is needed to switch the operation from an external source and the battery. The first part of the project deals with qualities of batteries and the way of their recharging. In the second part I design an individual blocks charger. In the third part I deal with a communication with a computer charger and data visualization. And in the last part I designed a program for the charger.
|
|
|
Effect of temperature on electrochemical parameters of Li-S battery
Bečan, Jan ; Skala, Kateřina (referee) ; Jaššo, Kamil (advisor)
This bachelor's thesis deals with the production of lithium-sulfur battery and the effect of changing temperatures on its electrochemical parameters. The theoretical part is focused on primary and secondary batteries and their historical evolution, anode and cathode materials for lithium-ion batteries and next-generation batteries. The practical part is focused on preparing the electrode material for lithium-sulfur battery, completion of electrochemical cell and measuring the values of cycling charge/discharge at different temperatures.
|
|
| |
|
|
Control algorithms for e-car
Hrazdira, Adam ; Fiedler, Petr (referee) ; Zezulka, František (advisor)
Cílem práce byl návrh a implementace řídicích algoritmů pro optimalizaci spotřeby energie elektrického vozidla. Hlavním úkolem byla optimalizace rozložení energie mezi hlavním zdrojem energie (bateriemi) a super-kapacitory v průběhu jízdního cyklu. Jízdní výkonový profil je odhadován a předpovězen na základě 3D geografických souřadnic a matematického modelu vozidla. V první části jsou uvedeny komponenty vozidla a jejich modely. Poté jsou představeny algoritmy na základě klouzavého průměru a dynamického programování. Byly provedeny simulace a analýzy pro demostraci přínosů algoritmů. V poslední části je popsána Java implementace algoritmů a také aplikace pro operační systém Android.
|
|
|
Modern Materials for Automotive Industry
Vaníček, Jan ; Fojtášek, Jan (referee) ; Hejtmánek, Petr (advisor)
This work is focused on the description of conventional and unconventional materials that are used to build a car. Individual types of materials are sorted according to their application and characterized in terms of properties and real use. The end of each chapter is devoted to possible future trends.
|
guest ::
